REVERSIBLE JAW PULLERS . Εξωλκείς Ρουλεμάν - Limnios E-Shop

3-jaw combination puller with locking mechanism KUKKO 486-1

limnios — Mon, 20 Mar 2023 11:28:13 +0000

KUKKO 486-1 3-jaw combination puller with locking mechanism

The post 3-jaw combination puller with locking mechanism KUKKO 486-1 appeared first on Limnios.

Universal 2-jaw puller with narrow jaws KUKKO 20-3-S

limnios — Sat, 31 Dec 2022 07:14:08 +0000

KUKKO 20-3-S Thin pulling hook with quick adjusting capability quick adjust.
Parallel pulling hooks in every position, even with full load.
For removing bearings, gears, discs, etc. for tight or difficult-to-access spaces.
The thin pulling hooks are suitable for narrow, difficult-to-access locations.Made in Germany quality.
Strong design, high performance and long life.

Aperture: 65-250mm
Leg length: 200 mm
Maximum pull: 9 tn
Weight: 6.810 kg

The post Universal 2-jaw puller with narrow jaws KUKKO 20-3-S appeared first on Limnios.

Universal 2-jaw puller with narrow jaws KUKKO 20-20-S

limnios — Sat, 17 Dec 2022 10:44:39 +0000

Thin pulling hook with quick adjusting capability quick adjust.
Parallel pulling hooks in every position, even with full load.
For removing bearings, gears, discs, etc. for tight or difficult-to-access spaces.
The thin pulling hooks are suitable for narrow, difficult-to-access locations.Made in Germany quality.
Strong design, high performance and long life.

Aperture: 40-200mm
Leg length: 150 mm
Maximum pull: 5 tn
Weight: 3.300 kg

The post Universal 2-jaw puller with narrow jaws KUKKO 20-20-S appeared first on Limnios.

Universal 2-jaw puller with narrow jaws KUKKO 20-2-S

limnios — Sat, 17 Dec 2022 10:31:57 +0000

Aperture: 40-160mm
Leg length: 150 mm
Maximum pull: 5 tn
Weight: 3 kg

The post Universal 2-jaw puller with narrow jaws KUKKO 20-2-S appeared first on Limnios.

Universal 2-jaw puller with narrow jaws KUKKO 20-10-S

limnios — Sat, 17 Dec 2022 10:26:37 +0000

Aperture: 30-120mm
Leg length: 100 mm
Maximum pull: 2.5 tn
Weight: 1,350 kg

The post Universal 2-jaw puller with narrow jaws KUKKO 20-10-S appeared first on Limnios.

Universal 2-jaw puller with narrow jaws KUKKO 20-1-S

limnios — Sat, 17 Dec 2022 10:14:21 +0000

Aperture: 30-90mm
Leg length: 100 mm
Maximum pull: 2.5 tn
Weight: 1,250 kg

The post Universal 2-jaw puller with narrow jaws KUKKO 20-1-S appeared first on Limnios.

Universal 2-jaw puller with swiveling jaws KUKKO 41-0

limnios — Sat, 17 Dec 2022 07:18:21 +0000

Swivelling standard puller jaws.
Two-arm design for space-saving operation.
For removing bearings, gears, discs, etc.
The larger the pulling force, the stronger the puller hook’s grip on the workpiece to be removed.
Spindle head band prevents the wrench from slipping off.
The part due to be removed (e.g. a gear, pulley or ball bearing) is gripped from the outside.
Tightening of the pressure screw and the resulting pressure removes the part from the shaft.
If several parts have to be removed, always follow a step-by-step process.
Do not remove several parts at the same time.
The pulling hooks’ support surfaces must always be straight and sit fully beneath the part to be removed.
Quality made in Germany.
Strong design, high performance and long service life.

Technical attribute Metric Imperial
Spread 12 – 60 mm
Depth 40 mm
Maximum load 1,0 t 1 US t
Weight 0.205 kg

The post Universal 2-jaw puller with swiveling jaws KUKKO 41-0 appeared first on Limnios.

SMALL PART PULLER KUKKO 43-001

limnios — Sat, 17 Dec 2022 06:34:54 +0000

Thin pulling hooks.
Automatic self-centering pulling hooks.
For removing particularly small bearings, gears or discs, etc. for tight or difficult-to-access spaces.
This handy, space-saving model is particularly suited for vehicle electrical equipment, electrical workshops, compressed air repair processes and other similar applications.
The thin pulling hooks are suitable for narrow, difficult-to-access locations.
The part due to be removed (e.g. a gear or ball bearing) is gripped from the outside.
Tightening of the pressure screw and the resulting pressure removes the part from the shaft.
With increasing spindle pressure, the pulling hooks clasp the part to be removed with an increasing amount of force.
Do not use any electrical or pneumatic servo screwdrivers or hammer drills.
Protective blanket required.
Quality made in Germany.
Strong design, high performance and long service life.

diameter of cone end: 4,5 mm
height of claw end: 1,5 mm
heigth of cone end: 10 mm
Number of jaws: 2
Series: 43-001

The post SMALL PART PULLER KUKKO 43-001 appeared first on Limnios.

FACOM U.306-180PB Outside pullers

admin — Tue, 23 Nov 2021 08:39:19 +0000

Versatile: takes 2 or 3 legs. Converts into inside puller with the legs U.306G2 + screw U.306-4 or legs U.306G20 + screw U.306-2.
Comfort: self-gripping legs by return spring. The puller stays in rolling position even when not in tension.
Safety: legs locked in position on the bearing using a knob. No risk for the puller to escape from the bearing.
Shear pin: the pin shears if torque limit is exceeded. Supplied with 2 spare pins.
Set of 3 spare pins. Refer to spares table according to puller power.
Adaptable puller accessories: slide hammer U.306M (direct attachment) and beam U.40 (attached using ring and nut U.306A1 to be ordered separately).
The U.306-260 puller is supplied with the U.306-3 screw fitted with its extension.

The post FACOM U.306-180PB Outside pullers appeared first on Limnios.

Reversible Jaw Puller TMMR 200F SKF

admin — Tue, 23 Nov 2021 08:39:13 +0000

SKF TMMR series of extractors are suitable for internal and external traction of bearings and other components, such as gears and pulleys.
An essential and flexible tool for downloading external and internal applications. • Self-locking arms for easy adjustment handle width. Grip length: 65-204mm Active arm length: 169mm “

The post Reversible Jaw Puller TMMR 200F SKF appeared first on Limnios.